SAME BUSINESS DAY SHIPPING
OE-PART
OE‑PART 68254149AA HID Xenon Ballast - 35W D3S D3R Headlight Control Module for Dodge Charger/Challenger
SKU: BAL-OEP-DG-4199AA-X1
Sale
$80.99
In Stock
100% GENUINE PRODUCTS
WARRANTY COVERAGE
- Description
- Return Policy
OE-PART: Best Alternative to the OEM HID Ballasts
The OE-PART 68254149AA HID Xenon Ballast Control Module is an aftermarket replacement headlight power supply unit engineered for vehicle lighting systems originally equipped with factory D3S HID ballasts. Designed to power 35W D3S D3R xenon HID bulbs, this replacement control module supplies standard operating power to service factory-installed HID headlamps.
When an original HID ballast fails or degrades due to electronic wear, thermal fatigue, or moisture intrusion, the headlight bulb may flicker, display erratic start-up, or fail to illuminate entirely. When the ballast is the root cause of the lighting issue, installing a replacement module may help restore proper function to the HID system. Sourced through HID Concept.com, the OE-PART 68254149AA replacement ballast offers a practical aftermarket option for servicing factory xenon headlight assemblies. Operating on a 12V DC input with seller-published specifications of 35W output power (42V AC) and a rated operating lifespan of approximately 2,000 hours, this item is sold individually (Pack of 1).
Key Features & Benefits
- Aftermarket Replacement Design: Marketed as a replacement option for original Mopar part number 68254149AA and seller-referenced part numbers.
- Seller-Specified 35W Power Rating: Operates on a 12V DC input voltage and delivers a rated 35W output power (42V AC) for 35W HID bulb applications.
- D3S D3R Bulb Application: Engineered specifically to support 35W D3S D3R HID bulb configurations as listed in published technical specifications.
- Rated Lifespan: Features a seller-rated operational lifespan of approximately 2,000 hours under standard operating conditions.
- Integrated Harness Interface: Designed to connect to existing factory headlight wiring and mounting points on listed compatible applications.
- Cost-Effective Service Solution: Provides an accessible alternative to expensive OEM dealership replacement components.
Vehicle Compatibility Section
This replacement ballast corresponds to Mopar model reference 68254149AA. Compatibility applies strictly to vehicle models factory-equipped with HID xenon headlights:
Part Number References
Mopar: 68254149AA
Vehicle Application List (Factory HID Xenon Trims Only)
2015-2023 Dodge Charger (Fits vehicles with factory HID headlights)
2015-2023 Dodge Challenger (Fits vehicles with factory HID headlights)
Important Fitment Notice: Designed solely for factory-installed HID Xenon headlight assemblies. This ballast will not fit or convert vehicles equipped with standard halogen bulbs or aftermarket LED headlights. Because headlight assembly configurations can vary by trim, production year, and regional option packages, HID Concept strongly recommends removing your original ballast and visually verifying the part number, shape, and connector pins before placing an order.
Performance & Visibility Section
An operational HID ballast is required to supply and maintain electrical power to xenon bulbs. Over time, original control units may degrade, which can lead to bulb instability or an unlit lamp. Replacing a defective control module with the OE-PART 68254149AA assists in supplying required electrical power to your D3S, D3R xenon bulbs, helping maintain proper headlight operation for nighttime driving when the ballast is the origin of the failure.
OEM Quality & Reliability Section
Sourcing replacement headlight control units through HID Concept.com provides vehicle owners with an accessible option for repairing non-working headlights. Built to align with stock electrical parameters, this module offers practical replacement service for daily driving needs.
Service Recommendation: Headlight symptoms like flickering or light loss can stem from failed bulbs, igniters, blown fuses, or damaged wiring in addition to ballast failure. Because opposing components accumulate equal operating hours, HID Concept suggests inspecting both bulbs and ballasts during lighting system troubleshooting.
Installation Information
The OE-PART 68254149AA ballast features an aftermarket replacement layout designed to match factory mounting locations and plug connectors on supported applications.
To install, ensure the vehicle ignition is OFF and power is disconnected. Access the headlight housing, remove the original ballast unit, connect the vehicle wiring harness plug to the new OE-PART module, and secure it using stock mounting hardware.
Technical Specs
| Input Voltage | 12V DC |
| Output Voltage | 42V AC |
| Output Power | 35W |
| Rated Lifespan | approx 2000 hours |
| Application | D3S D3R |
HIDCONCEPT.COM ships worldwide using UPS, FedEx, DHL, & USPS within 24-48 hours on business days.
For International customers:
Please be aware that your country may charge you customs duties, taxes, and brokerage fees on imported goods for certain products. We are not responsible for any customs or duty taxes that your country’s government agency may charge on your merchandise. We advise you to consult your local government import office with any questions.
Return
We will accept returns for a refund or exchange on products in NEW / unopened condition with the UNOPENED original package within 30 days of delivery. All returns without an exchange are subject to a 15% restocking fee without exception. The customer is responsible for return shipping unless the reason for the return was our mistake, in which case we will send you a prepaid shipping label. Your original shipping cost will be deducted from the refundable amount if you used a promotional free shipping code. All refunds must be issued back to the original payment method. We will NOT be able to process your return if your RMA number is not included with your product. Please allow 2-3 business days for us to process the return upon receipt.
We reserve the right to deny/refuse any return if it does not meet the criteria stated above.
Refund
Please allow 2-3 business days for us to process your refund once we receive your returned product. We will not issue a refund if your returned product does not meet the criteria stated in our return policy. Please note that there is a 15% restocking fee unless you are returning your product for an exchange.
