DAMA 7440 Signal Light Bulb Socket Holder Adapters for Acura ILX MDX RSX Honda Civic Fit Insight Odyssey Passport Pilot | Pack of 2

DAMA 7440 Signal Light Bulb Socket Holder Adapters for Acura ILX MDX RSX Honda Civic Fit Insight Odyssey Passport Pilot | Pack of 2

The DAMA 7440 T20 Signal Bulb Socket Holder Adapters (OEM Part # 33302-S7A-003) are direct-fit replacement sockets designed to resolve hyper-flashing, corroded contacts, and heat-damaged connectors in Honda and Acura signal light assemblies. Engineered specifically for T20 wedge-base bulbs (such as 7440, 7440A, 7440NA), these OEM-spec sockets restore stable voltage and reliable signaling performance across front turn signal, rear turn signal, or combination lamp positions. Available as a pack of 2 at HIDConcept.com, this plug-and-play set delivers a weather-tight, leak-free seal and high heat resistance for maximum visibility.

Key Features & Benefits

• Fits Standard T20 / 7440 Bulbs: Engineered specifically to accommodate T20 wedge-base single and dual-filament bulbs, including 7440, 7440A, 7440NA, and WY21W amber or clear signal bulbs.
• Exact OEM Direct Replacement: Replaces factory part number 33302-S7A-003 with matching locking tabs, terminal spacing, and connector indexing for a seamless fit in front, rear, or combination lamp housings.
• Fixes Hyper-Flashing & Circuit Failure: Restores continuous electrical contact, eliminating hyper-flashing dashboard errors, flickering indicators, and dark turn signal faults caused by melted stock sockets.
• Weather-Sealed Moisture Barrier: Features an automotive-grade rubber O-ring seal that blocks water, road salt, dust, and humidity from reaching internal electrical connections inside the lamp assembly.
• High-Heat Composite Polymer: Manufactured from high-dielectric, heat-resistant synthetic housing materials that withstand continuous thermal output from bulbs without warping or cracking.
• 100% Plug-and-Play Installation: Snaps directly into your vehicle’s factory wiring harness and twist-locks smoothly into the OEM signal housing with no cutting or splicing required.

Vehicle Compatibility Section

This OEM-spec T20 signal bulb socket holder adapter set is engineered specifically for select Honda and Acura models utilizing OEM part number 33302-S7A-003. Depending on your specific model and trim, this socket is used in front turn signal, rear turn signal, or tail/combination lamp positions:

Honda Acura MPN: 33302-S7A-003 / 33302S7A003

2016–2022 Acura ILX
2007–2013 Acura MDX
2005–2006 Acura RSX 
2016–2021 Honda Civic 
2007–2008 Honda Fit
2010–2014, 2019–2022 Honda Insight 
2011–2017 Honda Odyssey
2019–2026 Honda Passport
2019–2025 Honda Pilot

Fitment Verification Note: Vehicle production dates, trim packages, and lighting options affect socket location (front turn signal, rear turn signal, or tail lamp). Please visually inspect your stock connector and verify OEM part number 33302-S7A-003 on your original part before ordering.

Performance & Visibility Section

A failing signal lamp socket creates significant safety hazards on the road. When factory plastic retainers warp or internal brass contacts oxidize due to high bulb operating temperatures, electrical conductivity drops. This results in rapid hyper-flashing, dim output, or total signal failure—leaving other drivers unaware of your turning or braking intentions. Upgrading to fresh OEM-spec DAMA socket assemblies from HIDConcept.com restores optimal voltage flow to your T20 / 7440 signal bulbs. Crisp, uninterrupted signaling ensures your vehicle remains fully compliant with highway safety standards while keeping you clearly visible to surrounding traffic during night driving and severe weather.

OEM Quality & Reliability Section

At HIDConcept.com, we specialize in supplying lighting components that meet or exceed original factory standards. Stock signal lamp sockets on Honda and Acura vehicles frequently suffer from thermal stress and seal deterioration over time. These DAMA replacement sockets are constructed with corrosion-resistant copper contact pins housed inside a high-temperature thermoplastic body. Paired with a heavy-duty silicone rubber weather seal, these sockets isolate electrical contacts from heat, road debris, and moisture, ensuring long-term durability and trouble-free performance.

Installation Information

Replacing a damaged turn signal or combination lamp socket is a straightforward DIY task requiring no electrical modifications:

• Safety Preparation: Turn off the engine, engage the parking brake, and ensure headlight/taillight housings have cooled down completely.
• Locate the Socket: Access the back of the signal lamp housing from inside the engine compartment, rear trunk panel, or wheel arch splash shield.
• Remove Broken Socket: Press the release tab on the wiring connector to detach the harness, then twist the socket counterclockwise to unlock it from the lamp housing.
• Insert T20 / 7440 Bulb: Align the base pins of a fresh 7440 wedge bulb into the new socket slot and press firmly to seat the bulb.
• Install & Test: Reattach the vehicle wiring harness, push the new socket into the lamp receiver, and twist clockwise until it clicks into place. Test turn signal, parking light, and hazard light operation to verify function.
  
  

Technical Specs