DAMA 7440 Female Wire Harness - Connector for Tail/Brake/Turn/Reverse Light 5" 18AWG | Pack of 2

DAMA 7440 Female Wire Harness - Connector for Tail/Brake/Turn/Reverse Light 5" 18AWG | Pack of 2

Restore electrical connection to your vehicle's exterior signal lighting with the DAMA 7440 Female Wire Harness Connector Pack from HID Concept.com. Designed as a replacement 7440 female bulb socket for compatible applications, this 2-piece pigtail assembly addresses common signal lamp failures like intermittent connectivity. Each socket comes equipped with a rubber weatherproofing ring and 5 inches of 18AWG wiring leads. Whether you are performing an electrical repair or installing custom retrofits, this passive socket assembly provides an electrical connection between the vehicle wiring and your 7440-sized bulb.

Key Features & Benefits

• 7440 (T20) Specification: Compatible with standard single-filament 7440, 992, and W3X16D wedge bulb bases used in automotive signal applications.
• 18AWG Wiring Leads: Equipped with 5 inches of 18-gauge wiring suitable for automotive lighting repairs and wiring replacement.
• Integrated Rubber Gasket: Includes a pre-fitted rubber ring that seals against the lamp housing to protect internal components from moisture entry.
• Molded Plastic Socket Core: Features a molded plastic socket housing for automotive bulb applications, built to mount into compatible headlight or taillight housings.
• 2-Pack Configuration: Ships as a pair to allow replacement on both the driver and passenger sides of the vehicle circuit.

Vehicle Compatibility & Applications

This replacement wire harness is designed for vehicles utilizing a standard 7440 single-filament bulb socket layout for exterior signal lamps.

Fitment Note

Confirm your factory socket style before purchasing. While the 7440 wedge-base is utilized by auto brands like Toyota, Lexus, Honda, Nissan, Subaru, Hyundai, and Kia, vehicle manufacturers use different socket configurations across various trims and model years. Vehicle make, model, and year alone are insufficient to determine compatibility. This harness features a 2-wire connection intended for single-filament applications only and will not replace 3-wire dual-filament 7443 sockets.

Common applications include rear turn signals, reverse lights, daytime running lights (DRL), and other single-filament 7440 bulb locations. Verify the original socket type before purchase.

Performance & System Function

Corroded or damaged bulb sockets may cause intermittent operation or loss of bulb function. Replacing a failed socket with the DAMA 7440 harness may help restore electrical continuity between the vehicle wiring and the bulb. Because this is a passive electrical channel, it will not independently alter the brightness, lumens, or color temperature of your lighting; instead, it provides the connection required for your replacement halogen or LED upgrade bulbs to receive power from the vehicle's 12V system.

Quality & Reliability

DAMA automotive lighting hardware focuses on physical construction to provide functional aftermarket solutions for routine vehicle servicing. Features metal bulb-contact terminals housed within a molded socket body that accommodates the wedge bulb base. The replacement assembly is designed to provide a secure physical fitment within compatible passenger car and truck lamp housings under normal driving conditions.

Installation Information

This repair harness features open-ended pigtail wires ready for manual wire stripping, terminal crimping, or soldering into your existing wiring loom. Because accurate electrical grounding is essential for modern automotive modules, verify your positive and ground paths with a multimeter or test light before final splicing. To keep your lighting housing sealed over time, protect your wire connections externally with adhesive-lined heat shrink tubing or electrical insulation.

Technical Specs