SAME BUSINESS DAY SHIPPING
DAMA
DAMA TF552 2‑Pin LED Flasher Relay for Automotive / Motorcycle / ATV Turn Signal Hyperflash Fix Plug and Play | Pack of 1
SKU: FL-2P-FLL552-X1
$7.99
In Stock
100% GENUINE PRODUCTS
WARRANTY COVERAGE
- Description
- Return Policy
- Reviews
DAMA TF552 2‑Pin LED Flasher Relay for Automotive / Motorcycle / ATV Turn Signal Hyperflash Fix Plug and Play | Pack of 1
The DAMA TF552 (5362) 2-Pin Round Metal LED Flasher Relay is a plug-and-play replacement module made to eliminate the turn-signal hyperflashing issue caused by converting factory-installed halogen incandescent bulbs to LED bulbs. Hyperflashing is an integrated vehicle function that alerts drivers when a turn signal bulb has gone out. Because LED bulbs have far less power consumption, the vehicle’s indicator system registers the lower power level and mistakenly triggers a rapid flash sequence. Sourced from HID Concept.com, this plug-and-play relay resolves the issue immediately, providing a flashing frequency of 90 flashes per minute. Sold as a single unit, this flasher relay requires no modifications for installation and features an external wire with a 2-pin connector. It is designed for vehicles equipped with a 2-Pin Round Metal configuration and is especially popular with motorcycles, ATVs, and snowmobiles.
Key Features & Benefits
- Turn Signal Correction: Specifically made to eliminate the rapid hyperflashing issue caused by converting vehicle signaling lamps from halogen incandescent bulbs to LEDs.
- Plug-and-Play Installation: Designed as a modification-free swap that connects directly into your vehicle's factory layout.
- External Wire Layout: Features an integrated external wire lead terminated in a 2-pin connector block.
- Blinking Frequency: Factory-preset to deliver a flashing frequency of 90 flashes per minute.
- Operating Temperature Range: Rated for stable electrical performance in environments ranging from −40°F to +176°F.
- Switch Current Capacity: Internal electronic componentry handles an electrical switch current rating of up to 12A.
- Maximum Power Load: Capable of safely managing an electrical power load of up to 150W.
Vehicle Compatibility Section
This 2-pin flasher relay is designed for vehicles using a compatible 2-Pin Round Metal flasher relay configuration. It features a verified dual-voltage electrical specification, allowing it to function on standard 12V and 24V networks. It features a cross-reference for part numbers TF552 and TF536. This configuration is especially popular with motorcycles, ATVs, and snowmobiles, working for most motorcycle brands such as Honda, Kawasaki, KTM, Suzuki, Yamaha, and many other brands.
Important Manufacturer Warning: Relay socket layouts and terminal configurations vary significantly across vehicle makes, models, and model years. Please physically verify that your stock flasher unit uses the exact 2-Pin Round Metal configuration layout before ordering. Installing this module in an incompatible configuration can blow your fuses, destroy the electronic flasher, and void the product warranty.
Performance & Visibility Section
Upgrading indicator lights to LED lamps changes the vehicle signaling setup. The DAMA TF552 (5362) 2-pin flasher relay addresses the rapid blinking rate, providing a flashing frequency of 90 flashes per minute. While this flasher relay is an electronic control module that does not change the brightness or color output of your bulbs on its own, it functions to establish a steady flashing cadence at its rated frequency.
Technical Specifications
Sourcing your replacement electrical hardware through HID Concept.com provides an electronic flasher accessory with a verified operating voltage of 12V / 24V. The module is engineered with a maximum power load of 150W, an electrical switch current capacity of 12A, and functions inside an environmental temperature range spanning from −40°F to +176°F.
Installation Information
The DAMA TF552 (5362) LED flasher relay features a direct plug-and-play design meant to replace your vehicle's factory module.
Location Note: Flasher relay locations vary by vehicle design. If you need help finding your original module, please check standard automotive fuse blocks or consult your vehicle service manual.
To install, locate your vehicle’s original factory flasher module, verify compatibility with the 2-Pin Round Metal design, disconnect the factory unit, and plug the new DAMA module securely into the terminal connection using its external wire pigtail harness. Ensure the assembly is seated and test both your left/right indicators and hazard signals to verify function before operation.
Technical Specs
| Pin Count | 2 pin |
|
Cross Reference |
TF552, TF536 |
| Operating Voltage | 12V / 24V |
| Operating Temperature | -40 °F ~ +176 °F |
| Flashing Frequency |
90 flash/min |
| Switch Current (Amp) |
12A |
| Application |
LED Turn Signal Hyperflashing solution |
HIDCONCEPT.COM ships worldwide using UPS, DHL, & USPS within 24-48 hours during the business days.
For International customers:Please be aware that your country may charge you customs duties, taxes, and brokerage fees on importing goods on certain products. We are not responsible for any customs or duty taxes that your country’s government agency may charge on your merchandise. We advise you to consult your local government import office with any questions.
Return
We will accept returns for a refund or exchange on products in NEW/ unopened condition with the UNOPENED original package within 30 days of delivery. All returns without an exchange are subject to a 15% restocking fee without exception. The customer would be responsible for return shipping unless the reason for the return was our mistake which we will send you the pre-paid shipping label for. Your original shipping cost will be deducted from the refundable amount if you use the promotional free shipping code. All refunds must be issued back to the original payment method. We will NOT be able to process your return if your RMA number is not included with your product. Please allow 2-3 business days for us to process the return upon receipt.
We reserve the right to deny/ refuse the return if your return does not meet the criteria stated above.
Exchange
Product may be exchanged if they are in NEW/ unopened condition with the UNOPENED original package within 30 days of delivery. Customer is responsible for shipping cost to and from our warehouse unless exchange is required by our mistake which we will cover all the shipping costs. You will not be able to re-use any promotional free shipping code if you have already used them on your original purchase.
Refund
Please allow 2-3 business days for us to process your refund once we receive your returned product. We will not issue the refund if your returned product does not meet the criteria we have stated on our return policy. Please note that there is a 15% restocking fee unless you are returning your product for an exchange.
Questions & Answers
Have a Question?
Be the first to ask a question about this.
