SAME BUSINESS DAY SHIPPING
DAMA
DAMA CF13 KT600 3‑Pin LED Flasher Relay for Automotive / Motorcycle / ATV LED Turn Signal Hyperflash Fix Adjustable Speed Up to 600 Flash/Min | Pack of 1
SKU: FL-3P-CF13KT600-X1
$12.99
In Stock
100% GENUINE PRODUCTS
WARRANTY COVERAGE
- Description
- Return Policy
- Reviews
DAMA CF13 KT600 3‑Pin LED Flasher Relay for Automotive / Motorcycle / ATV LED Turn Signal Hyperflash Fix Adjustable Speed Up to 600 Flash/Min | Pack of 1
The DAMA CF13 (EP34) KT600 3-Pin LED Speed Adjustable Flasher Relay is a direct replacement solution designed to address turn-signal hyperflashing. Because LED bulbs consume less power, they can trigger hyperflashing on some vehicles after conversion from incandescent bulbs. Sourced from HID Concept.com, this electronic replacement flasher relay eliminates hyperflashing and provides an adjustable flash rate via a top-mounted control knob, allowing flashing speeds up to 600 times per minute. Sold as a single unit, this speed-adjustable flasher relay is designed for vehicles that use a 3-pin CF13 KT configuration.
Key Features & Benefits
- High-Speed Adjustable Control: Equipped with an adjustable control knob on top to manually set the turn signal rate up to 600 flashes per minute to create strobe, flash, and custom blinking effects.
- Instantly Resolves Hyperflashing: Calibrated to correct the rapid turn signal flashing rate that occurs after switching from halogen bulbs to LEDs.
- True Plug-and-Play Setup: Requires no cutting, splicing, or complex load resistor wiring—simply replace your stock flasher with the DAMA CF13 KT600.
- Turn Direction Adjustability: Turning the top-mounted knob counterclockwise slows the flash rate, while turning it clockwise increases the flash rate.
- Operating Temperature Range: Rated for operation in environments ranging from −40°F to +176°F.
- Wide Current Handling: Features a switch current range of 0.02A to 20A, allowing it to adapt to low-draw LED components.
Vehicle Compatibility Section
This 3-pin flasher relay is designed specifically for vehicles using a 3-pin CF13 KT configuration. It acts as a cross-reference replacement for part numbers CF-13, EP34, and CF13JL-02.
Important Safety Note: Flasher relay configurations vary significantly by vehicle make and model. Please confirm that your stock flasher matches the CF13 terminal configuration before ordering. Installing this relay in an incompatible vehicle can damage the module or blow a fuse.
Performance & Visibility Section
Upgrading your indicator lights to LED technology improves response time and visibility, but a hyperflashing signal can be distracting on the road. The DAMA CF13 KT600 3-pin LED flasher relay allows adjustment of the turn-signal flash rate up to 600 flashes per minute. While this flasher relay is an electronic control module that does not change the brightness or color output of your bulbs on its own, it allows you to bring your retrofitted LED turn signals to your preferred blinking or custom strobe tempo.
OEM Quality & Reliability Section
Standard vehicle wiring must endure harsh weather, vibration, and temperature swings. The DAMA CF13 KT600 flasher relay is rated for operation from −40°F to +176°F. Sourcing your replacement hardware through HID Concept.com provides an electronic flasher accessory designed to operate at a nominal voltage of 12V DC.
Installation Information
Installing the DAMA CF13 KT600 LED flasher relay is a direct plug-and-play process that replaces your factory flasher module.
Location Note: Flasher relay location varies by vehicle. Please consult your vehicle service manual, if necessary, to locate your original module.
To install, locate your vehicle's stock flasher, gently unplug the original 3-pin flasher, and plug the DAMA CF13 KT600 relay firmly into the socket. Adjust the control knob on the top of the relay to set the desired flash rate, and ensure the relay is securely seated before driving.
Technical Specs
| Pin Count | 3 pin |
|
Cross Reference |
CF-13 EP34 CF13JL-02 |
| Operating Voltage |
12V |
| Operating Temperature | -40 °F ~ +176 °F |
| Flashing Frequency | Variable Up to 600 flash/min |
| Switch Current (Amp) |
0.02A~20A |
| Application |
LED Turn Signal Hyperflashing Solution |
HIDCONCEPT.COM ships worldwide using UPS, DHL, & USPS within 24-48 hours during the business days.
For International customers:Please be aware that your country may charge you customs duties, taxes, and brokerage fees on importing goods on certain products. We are not responsible for any customs or duty taxes that your country’s government agency may charge on your merchandise. We advise you to consult your local government import office with any questions.
Return
We will accept returns for a refund or exchange on products in NEW/ unopened condition with the UNOPENED original package within 30 days of delivery. All returns without an exchange are subject to a 15% restocking fee without exception. The customer would be responsible for return shipping unless the reason for the return was our mistake which we will send you the pre-paid shipping label for. Your original shipping cost will be deducted from the refundable amount if you use the promotional free shipping code. All refunds must be issued back to the original payment method. We will NOT be able to process your return if your RMA number is not included with your product. Please allow 2-3 business days for us to process the return upon receipt.
We reserve the right to deny/ refuse the return if your return does not meet the criteria stated above.
Exchange
Product may be exchanged if they are in NEW/ unopened condition with the UNOPENED original package within 30 days of delivery. Customer is responsible for shipping cost to and from our warehouse unless exchange is required by our mistake which we will cover all the shipping costs. You will not be able to re-use any promotional free shipping code if you have already used them on your original purchase.
Refund
Please allow 2-3 business days for us to process your refund once we receive your returned product. We will not issue the refund if your returned product does not meet the criteria we have stated on our return policy. Please note that there is a 15% restocking fee unless you are returning your product for an exchange.
Questions & Answers
Have a Question?
-
What is the minimum flash adjustable?
The minimum flash rate for the KT600 typically starts at approximately 60 to 70 flashes per minute (FPM)
For any other questions, please write to info@hidconcept.com
