SAME BUSINESS DAY SHIPPING
DAMA
DAMA 9007 9004 Extension Male and Female Wire Harness - Connector for Headlight 6" 18AWG | Pack of 2
SKU: WR-9007E-CER-X2
Sale
$4.99
In Stock
100% GENUINE PRODUCTS
WARRANTY COVERAGE
- Description
- Return Policy
- Reviews
DAMA 9007 9004 Extension Male and Female Wire Harness - Connector for Headlight 6" 18AWG | Pack of 2
Extend your vehicle's headlight wiring loop cleanly and securely with the DAMA 9007 9004 Extension Male and Female Wire Harness Pack from HID Concept.com. Engineered to provide an inline structural stretch for tight engine bays or custom retrofits, this 2-piece male-to-female adapter assembly eliminates the need for wire cutting or splicing. Each 6-inch lead acts as a direct-fit electrical bridge designed to interface with standard 9007 and 9004 bulb configurations. Whether you are adding auxiliary sub-assemblies, relocating lighting components, or protecting your factory wiring loom from heat, these extension harnesses deliver an effortless plug-and-play solution.
Key Features & Benefits
- 9007 / 9004 Plug Fitment: Precision-molded to interface cleanly with standard 3-pin 9007 (HB5) or 9004 (HB1) headlight bulb bases and factory wiring plugs.
- 6-Inch Extended Reach: Provides 6 inches of extra line clearance per side, giving you the slack needed to safely reroute headlight cables.
- Plug-and-Play Extension: Built with a pre-molded male plug on one end and a matching female receiving socket on the other for an instant inline upgrade.
- 18AWG Wiring Leads: Outfitted with 18AWG copper conductors suitable for standard automotive high-beam and low-beam headlight circuits.
- No Splicing Required: Avoids cutting factory wires, helping preserve your vehicle's original wiring by avoiding permanent modifications.
Vehicle Compatibility & Applications
This extension harness set is compatible with lighting systems that utilize standard 9007 or 9004 dual-beam bulb configurations for their main forward headlight assemblies.
Compatibility Note
Confirm your vehicle's factory plug style and wiring configuration before ordering. While 9004 (HB1) and 9007 (HB5) bulbs look visually similar and both feature 3-pin configurations, they use different physical keying tabs on the outer connector shell and completely different internal pin assignments (ground, low beam, and high beam positions differ).
Because 9004 and 9007 setups are not physically or electrically identical, please verify your factory wire orientation and circuit compatibility before installation to prevent cross-routing power paths or fitting issues.
Performance & Visibility Section
When expanding an automotive lighting setup or integrating replacement headlight components, keeping a reliable and secure electrical loop is essential for maximizing visibility. Excessively strained, pulled, or poorly stretched factory wires can lead to poor connections, causing dimming, flickering, or intermittent lamp operation. Integrating the DAMA 6" extension wire connectors helps provide a secure electrical connection while reducing tension on factory wiring. Because this component functions solely as a passive copper adapter rather than a light-emitting source, it does not independently change the color temperature, raw lumens, or beam pattern of your lamps; instead, it helps maintain a reliable electrical connection between the vehicle harness and bulb so your upgraded LED or halogen bulbs can operate at their intended potential.
OEM Quality & Reliability Section
DAMA automotive lighting hardware provides functional, durable aftermarket lighting accessories designed for repair, component protection, and retrofit applications. This replacement extension wire harness features copper wiring, durable connector housings, and terminal pins designed to securely interface with compatible 9007/9004 configurations. The modular layout delivers a reliable, direct-fit connection between the factory harness and your lighting components.
Installation Information
This extension harness is designed to be fully plug-and-play. Disconnect the vehicle's battery or switch off the headlight controls before beginning. Unplug the factory headlight connector from the back of your 9007 or 9004 bulb base. Insert the factory male harness plug directly into the female socket side of the DAMA extension lead until it locks firmly. Securely connect the opposite male end of the DAMA extension harness to your headlight bulb terminal base. Route the extended 6-inch wiring path clear of hot engine components or moving parts, and safely secure any line slack using automotive-grade cable ties before testing the high and low-beam functions.
Technical Warning: Ensure the vehicle's ignition is completely off and power circuits are disconnected before performing electrical work. Because 9004 and 9007 terminal pinouts vary by design, verify circuit configuration alignment with your factory wire harness to avoid electrical shorts or blown fuses.
Technical Specs
| Size | 9004 (HB1) 9007 (HB5) |
|
Connector Gender |
Male / Female |
| Weather Resistant | Yes |
| Wire Gauge (AWG) | 18 AWG |
| Wire Length | Appx. 6 inches |
| Application |
Lighting repair, retrofit, and extension |
HIDCONCEPT.COM ships worldwide using UPS, DHL, & USPS within 24-48 hours during the business days.
For International customers:Please be aware that your country may charge you customs duties, taxes, and brokerage fees on importing goods on certain products. We are not responsible for any customs or duty taxes that your country’s government agency may charge on your merchandise. We advise you to consult your local government import office with any questions.
Return
We will accept returns for a refund or exchange on products in NEW/ unopened condition with the UNOPENED original package within 30 days of delivery. All returns without an exchange are subject to a 15% restocking fee without exception. The customer would be responsible for return shipping unless the reason for the return was our mistake which we will send you the pre-paid shipping label for. Your original shipping cost will be deducted from the refundable amount if you use the promotional free shipping code. All refunds must be issued back to the original payment method. We will NOT be able to process your return if your RMA number is not included with your product. Please allow 2-3 business days for us to process the return upon receipt.
We reserve the right to deny/ refuse the return if your return does not meet the criteria stated above.
Exchange
Product may be exchanged if they are in NEW/ unopened condition with the UNOPENED original package within 30 days of delivery. Customer is responsible for shipping cost to and from our warehouse unless exchange is required by our mistake which we will cover all the shipping costs. You will not be able to re-use any promotional free shipping code if you have already used them on your original purchase.
Refund
Please allow 2-3 business days for us to process your refund once we receive your returned product. We will not issue the refund if your returned product does not meet the criteria we have stated on our return policy. Please note that there is a 15% restocking fee unless you are returning your product for an exchange.
Questions & Answers
Have a Question?
Be the first to ask a question about this.
