DAMA 3157 Angled Female Wire Harness - Connector for Tail/Brake/Turn/Reverse Light 5.5" 18AWG | Pack of 2

DAMA 3157 Angled Female Wire Harness - Connector for Tail/Brake/Turn/Reverse Light 5.5" 18AWG | Pack of 2

Replace damaged, corroded, or melted dual-circuit bulb sockets with the DAMA 3157 Angled Female Wire Harness (Pack of 2) from HID Concept.com. Designed for tail lights, brake stops, turn signals, and other dual-circuit or running light applications utilizing a 3157 bulb, these replacement pigtails provide a secure electrical connection for factory sockets damaged by heat, corrosion, age, or poor electrical contact. The 90-degree right-angle design solves low-clearance space constraints behind shallow lens assemblies, paired with 5.5 inches of durable 18AWG wire leads compatible with standard incandescent filaments and modern 3157 LED upgrades. These open-ended pigtails require manual splicing, crimping, or soldering into your existing wiring loom to restore proper electrical contact. Because locking tabs, indexing configurations, and housing depths vary across vehicle manufacturers, visually verify your original factory plug style before ordering.

Key Features & Benefits

• Right-Angle Low-Profile Design: Features a specialized 90-degree angled socket body that fits comfortably into shallow taillight lenses or tight vehicle body corners where space behind the lamp housing is limited.
• Three-Wire Dual-Circuit System: Configured with a robust 3-wire layout utilizing 18AWG conductors to provide independent electrical contact paths for high-filament (brake/turn) and low-filament (running/tail) functions.
• Targeted Repair Component: Serves as a practical hardware solution that easily replaces damaged, corroded, melted, or intermittent factory sockets.
• Incandescent & LED Bulb Support: Engineered to accept standard 3157 dual-circuit wedge-base bulbs, maintaining steady electrical contact for standard glass filaments and compatible aftermarket LED replacements.
• Wedge Base Interoperability: Accommodates common large miniature wedge bulb trade sizes matching the 3157 indexing standard, including 3157, 3057, 3155, 3357, 3457, 4057, 4114, and 4157.

Vehicle Compatibility & Applications

This angled pigtail connector is compatible with many automotive, truck, commercial trailer, and RV applications that utilize a standard 3157 dual-circuit wedge bulb socket configuration. It acts as an adaptable replacement component for essential safety indicators and rear vehicle illumination.

Common dual-circuit application areas include:

• Dual-function rear brake and tail light assemblies
• Front or rear turn signal indicators with integrated parking/running lights
• Daytime Running Lights (DRL) utilizing dual-filament wedge bulbs
• Heavy-duty trailer stop, tail, and turn signaling configurations

Performance & Visibility Section

Swapping out a loose, corroded, or heavily melted factory taillight plug for this premium right-angle harness helps maintain proper electrical contact across your safety signaling circuits. While a passive wire harness does not independently generate lumens, change vehicle voltage, or influence beam patterns, eliminating poor electrical contact at the socket helps maintain reliable current flow between the vehicle wiring and bulb under standard operating conditions. This supports consistent bulb operation, keeping your turn signals, brake lights, and running lamps readily visible to other motorists during night driving, braking actions, or bad weather conditions.

OEM Quality & Reliability Section

DAMA lighting hardware focuses on solid physical construction to offer aftermarket reliability that aligns with common vehicle servicing needs. Built with resilient external wire insulation and standard metal leaf terminals tucked cleanly within the right-angle socket head, this pigtail holds the flat wedge base of standard 3157 bulbs firmly in place. The durable molded construction is designed for demanding automotive lighting applications, providing a dependable replacement solution for maintaining essential exterior vehicle lighting functions.

Vehicles That Commonly Use 90-Degree Angled 1156 Sockets
(Angled profiles are utilized when modern styling trims down clearance space, or when structural vehicle components run directly behind the lamp.)

• European Sedans & Wagons: European packaging is notoriously tight. To maximize trunk cargo volume, engineers push the interior carpet liners as close as possible to the outer body panels. This leaves a tiny, shallow gap behind the rear turn signal or brake light, making an angled wire exit necessary to keep the assembly flush.
• Sleek, Wrap-Around Corner Lights: Modern rear turn signals that wrap aggressively around the sharp rear corners of the vehicle fender often press right up against the inner structural wheel well or body framing. A straight connector would smash into the metal chassis, so a 90-degree plug is used to route the wire sideways along the contour of the plastic housing.
• Bumper-Mounted Lighting (Turn Signals, DRLs, and Lower Reverse Lights): Sockets that insert into lenses located down in the lower rear or front bumper covers frequently encounter a solid steel bumper reinforcement crash bar sitting right behind them. An angled connector is mandatory here to keep the wires from being crushed against the reinforcement beam.

Installation Information

This aftermarket wire harness is provided with open-ended pigtail leads, making it ideal for manual wire stripping, splicing, terminal crimping, or soldering into your vehicle's existing sub-harness. Because this handles a 3-wire dual-circuit line (handling ground, low-intensity circuit power, and high-intensity circuit power, respectively), installation is straightforward. However, because manufacturer wire color codes differ widely across automotive makes, it is recommended to use a digital multimeter or test light to isolate your factory wires before finalizing the splice to ensure accurate circuit routing.