DAMA 194 T10 Female Wire Harness - Socket Connector for Interior/Parking/Side Marker Lights 4.5" 18AWG | Pack of 2

DAMA 194 T10 Female Wire Harness - Socket Connector for Interior/Parking/Side Marker Lights 4.5" 18AWG | Pack of 2

Replace damaged, corroded, or melted 194/T10 bulb sockets with DAMA 194 T10 Female Wire Harnesses (Pack of 2). Designed for interior lights, parking lights, side marker lights, license plate lights, and other auxiliary lighting applications, these replacement socket pigtails provide a secure and reliable electrical connection. Compatible with both halogen and LED 194/T10 bulbs, they are ideal for lighting repairs, retrofits, and custom installations. Built with an 18AWG copper wire gauge for reliable electrical performance and approximately 4.5 inches of flexible lead length, these harnesses feature a high-quality, heat-resistant ceramic female T10 / 194 wedge-style socket head. This passive, single-circuit hardware component features open-ended pigtail leads that manually splice, crimp, or solder into your existing electrical wiring loom rather than operating as a plug-and-play assembly. While it contains no independent light source, does not alter overall circuit voltage, and will not eliminate standard resistance or CANbus error warnings, replacing a degraded receptacle improves metal-to-base electrical contact so your installed bulbs illuminate normally under standard operating conditions. This miniature hardware footprint is compatible with applications utilizing standard T10, 168, 194, 2825, or W5W wedge bulb configurations for low-wattage accent, marker, panel, or license plate lighting, though locking tab depths vary across vehicle makes, and these small sockets lack the electrical capacity required for primary high-beam or low-beam projector headlight systems.

Key Features & Benefits

• Durable Ceramic Socket Construction: Crafted from high-quality, heat-resistant ceramic to provide an ultra-long efficient lifespan in environments where factory plastic socket housings are prone to melting or thermal degradation.
• Dual-Lead Copper Wire System: Constructed with an 18AWG copper wire gauge to guarantee a reliable, consistent electrical flow for single-circuit miniature automotive lamps.
• Replacement Repair Component: Serves as a practical hardware solution to address intermittent lighting issues, corrosion, or loose bulb fitment caused by worn original factory socket contacts.
• Halogen & LED Bulb Support: Engineered to accept compatible T10 wedge-base bulbs, maintaining steady electrical contact for standard glass wedge filaments and compatible aftermarket LED replacements.
• Wedge Base Interoperability: Accommodates common miniature wedge bulb trade sizes matching T10 and W2.1x9.5d footprint dimensions, such as 194, 168, 2825, W5W, 147, 152, 159, 161, 175, 194NA, 194ST, 194LL, 168NA, 2821, and 2827.

Vehicle Compatibility & Applications

This pigtail connector is compatible with automotive, trailer, motorcycle, and RV applications that utilize a standard T10 / 194 / W5W miniature wedge bulb socket configuration. It serves as a replacement hardware component for secondary exterior and interior illumination paths.

Common single-circuit application areas include:

• Instrument panel clusters, dashboard backlighting, and interior gauge pods
• License plate light housings, interior dome lights, map lights, and stepwell convenience lighting
• Side marker light housings, clearance indicators, and front parking lamp assemblies
• Auxiliary trunk lighting, glove box illumination, and RV interior accent lights

Disclaimer: Because locking tab configurations, twist-lock depths, and vehicle-specific harness lengths vary significantly across automotive manufacturers, always visually check your original factory socket configuration against this replacement design before installing. This hardware component does not alter overall circuit resistance; auxiliary load resistors or CANbus-adapted bulbs remain necessary to prevent dashboard error notifications on sensitive vehicle monitoring platforms.

Performance & Visibility Section

Replacing a cracked, corroded, or heat-damaged factory receptacle with this ceramic replacement pigtail improves electrical contact across your accessory lighting lines. While a replacement socket harness does not independently generate light or alter overall vehicle voltage, establishing clean metal-to-base physical contact helps your installed incandescent or LED bulbs operate under normal circuit conditions. This supports intended light projection, clarity, and signal visibility across your side markers, license plate paths, and dashboard gauges.

OEM Quality & Reliability Section

The DAMA T10 ceramic socket uses structured dimensions to ensure proper alignment when locking into matching factory lamp housings. This aftermarket pigtail component features robust insulated wire leads and secure internal metal terminal clips configured to match standard T10 wedge bulb bases. The heavy-duty ceramic core provides structural stability during twist-in seating, helping to keep miniature accessory lamps positioned properly within their respective optical housings while resisting structural fatigue from age and heat cycles.

Installation Information

This replacement wire harness is supplied with open-ended pigtail wire leads to accommodate standard automotive splicing, crimping, or soldering into an existing electrical wiring loom. Since this is a simple 2-wire single-circuit component (handling positive feed and negative ground, respectively), installation is straightforward. However, because wire color codes can vary from your vehicle's factory wiring schematic, it is recommended to verify the positive and ground leads using a digital multimeter or test light prior to making permanent connections to ensure proper circuit mapping.