Select Your Vehicle

DAMA

DAMA 1157 Male Wire Harness - Connector for Tail/Brake Light 4" 18AWG | Pack of 2

SKU: WR-1157M-X2
DAMA 1157 male wire harness pack of two with dual contact plug base and 18AWG wires
Close up of DAMA 1157 male adapter plug illustrating socket side
Close up profile of DAMA 1157 male adapter plug illustrating durable plastic injection molding
DAMA replacement male tail light socket wiring adapter showing integrated weather protection seal
1157 male wire harness pair from HID Concept for custom signal installations
DAMA 1157 male wire harness pack of two with dual contact plug base and 18AWG wires
Close up of DAMA 1157 male adapter plug illustrating socket side
Close up profile of DAMA 1157 male adapter plug illustrating durable plastic injection molding
DAMA replacement male tail light socket wiring adapter showing integrated weather protection seal
1157 male wire harness pair from HID Concept for custom signal installations
Sale

$9.99
$2.99 In Stock

SAME BUSINESS DAY SHIPPING

100% GENUINE PRODUCTS

WARRANTY COVERAGE

  • Description
  • Return Policy
  • Reviews

DAMA 1157 Male Wire Harness - Connector for Tail/Brake Light 4" 18AWG | Pack of 2

The DAMA 1157 Male Wire Harness (Pack of 2) from HID Concept.com is an aftermarket replacement male pigtail connector designed for automotive lighting repair and custom retrofit applications. Built with an 18AWG wire gauge and approximately 4 inches of flexible lead length, these harnesses feature a standard 1157 / BAY15d dual-contact male plug configuration. This component interfaces with a vehicle's compatible 1157 female lighting socket, allowing users to establish auxiliary connections, wire up compatible replacement bulbs, or extend existing circuitry without altering the factory wiring loom. This pack of two provides a practical hardware solution to help manage independent ground, low-intensity, and high-intensity electrical paths across dual-circuit tail light, brake light, and running indicator layouts.

Key Features & Benefits

  • Male Plug Configuration: Connects directly into a standard 1157 female vehicle socket, enabling users to construct custom extensions or integrate auxiliary lighting paths cleanly.
  • Dual-Circuit 3-Wire Layout: Configured with three 18AWG wire leads to cleanly segregate the ground, low-intensity running light, and high-intensity signal or brake light circuits.
  • Standard Build Materials: Assembled with durable composite plastics and insulated wiring to maintain consistent electrical conductivity under standard operating conditions.
  • Integrated Molded Protection: Features molded plastic insulation shields at the wire entry points to assist in protecting the core copper connection from environmental debris and moisture.
  • Bayonet Base Interoperability: Designed to interface mechanically with standard dual-contact bayonet indexing bulb frameworks matching 1157, BAY15d, 1034, 2057, 2357, 7528, and P21/5W dimensions.

Vehicle Compatibility & Applications

This product is a universal 1157 male pigtail adapter engineered to fit vehicles equipped with a standard dual-contact 1157 / BAY15d bulb socket architecture. It serves as an adaptable layout component for automotive, motorcycle, or trailer lighting systems that employ dual-circuit functions.

Common installation scenarios include:

  • Bridging external load resistors to a circuit when replacing standard bulbs with low-draw LEDs to correct signal flash rates.
  • Splicing custom wiring paths for dual-color corner marker lamps or aftermarket daytime running light (DRL) setups.
  • Extending wire leads on utility trailers, towing assemblies, or supplementary rear fog lamp assemblies.

Disclaimer: This product is a passive male plug adapter that fits into an existing vehicle socket. It contains no internal circuitry or processors and does not alter electrical resistance, change bulb brightness, or modify CANbus dashboard monitoring systems. Always visually inspect your vehicle's factory plug configuration, pin orientation, and physical clearance constraints before installation.

Installation Information

This 1157 male wiring connector is supplied with open-ended pigtail wire leads to accommodate standard automotive splicing, crimping, or soldering into your wiring system. Because this component controls a 3-wire, dual-filament architecture (handling ground, low-power mode, and high-power signaling mode, respectively), wire color codes may vary from your factory loom. We recommend tracing and confirming your vehicle’s factory pin functions with a digital multimeter before finalizing any splices to ensure accurate routing of your running, braking, or turning circuits.


Technical Specs

Size 1157
Connector Gender
Male
Weather Resistant Yes
Wire Gauge (AWG) 18 AWG
Wire Length Appx. 4 inch 
Application Lighting repair, retrofit, and extension

HIDCONCEPT.COM ships worldwide using UPS, DHL, & USPS within 24-48 hours during the business days.

For International customers:

Please be aware that your country may charge you customs duties, taxes, and brokerage fees on importing goods on certain products. We are not responsible for any customs or duty taxes that your country’s government agency may charge on your merchandise. We advise you to consult your local government import office with any questions.

Return

We will accept returns for a refund or exchange on products in NEW/ unopened condition with the UNOPENED original package within 30 days of delivery. All returns without an exchange are subject to a 15% restocking fee without exception. The customer would be responsible for return shipping unless the reason for the return was our mistake which we will send you the pre-paid shipping label for. Your original shipping cost will be deducted from the refundable amount if you use the promotional free shipping code. All refunds must be issued back to the original payment method. We will NOT be able to process your return if your RMA number is not included with your product. Please allow 2-3 business days for us to process the return upon receipt.

We reserve the right to deny/ refuse the return if your return does not meet the criteria stated above.

Exchange

Product may be exchanged if they are in NEW/ unopened condition with the UNOPENED original package within 30 days of delivery. Customer is responsible for shipping cost to and from our warehouse unless exchange is required by our mistake which we will cover all the shipping costs. You will not be able to re-use any promotional free shipping code if you have already used them on your original purchase.

Refund

Please allow 2-3 business days for us to process your refund once we receive your returned product. We will not issue the refund if your returned product does not meet the criteria we have stated on our return policy. Please note that there is a 15% restocking fee unless you are returning your product for an exchange.

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question