SAME BUSINESS DAY SHIPPING
DAMA
DAMA H7 LED CANbus Decoder Warning & Error Canceller Hyperflash Fix Anti-Flicker | Pack of 2
SKU: WR-H7-LED-DCD-X2
$19.99
In Stock
100% GENUINE PRODUCTS
WARRANTY COVERAGE
- Description
- Return Policy
- Reviews
DAMA H7 LED CANbus Decoder Warning & Error Canceller Hyperflash Fix Anti-Flicker | Pack of 2
Help address electrical compatibility issues when upgrading your vehicle's lighting with the DAMA H7 LED CANbus Decoder Warning & Error Canceller Pack from HID Concept.com. Designed as an inline solution for vehicles that exhibit compatibility issues after LED bulb installation, this 2-piece bypass assembly helps resolve common electrical compatibility issues encountered when replacing factory halogens with LED bulbs. Each module acts as an inline electrical interface between the factory harness and compatible LED bulbs. Whether you are addressing false dashboard warnings or correcting pulsing headlight behaviors, this inline interface module provides a connection for compatible H7 applications.
Key Features & Benefits
- H7 Fitment Footprint: Tailored to fit single-beam H7 wiring plugs commonly used in automotive low-beam headlight, high-beam headlight, or fog light assemblies.
- Dashboard Error Suppression: Intended to help reduce bulb-out warnings on some vehicles when used with compatible LED bulbs.
- Anti-Flicker Function: Intended to help reduce flickering or pulsing behavior that may occur on some PWM-controlled lighting systems.
- Plug-and-Play Connectors: Features pre-molded male and female 2-pin plugs that sit inline between your factory headlight harness and your aftermarket LED bulb driver.
- Single-Beam Application: Designed specifically for H7 single-beam circuits, providing a clean electrical pass-through.
Vehicle Compatibility & Applications
This CANbus interface module set is engineered for vehicles using H7 single-beam headlight and fog light configurations that experience electrical compatibility issues after installing LED upgrades.
Compatibility Note
Confirm your vehicle's factory bulb style and electrical system traits before ordering. CANbus monitoring and bulb-monitoring systems vary greatly across manufacturers and are used by various European, domestic, and import vehicle brands. This decoder is explicitly designed for H7 2-pin plug configurations and cannot be used with other bulb footprints (such as H4, 9005, or 9006). Because individual vehicle electronic control units (ECUs) process circuit data differently, no single decoder can resolve 100% of custom configuration conflicts.
Performance & Visibility Section
When upgrading from stock halogens to LED headlight bulbs, the lower power draw of solid-state lighting can lead to system errors. These electrical mismatches may cause flickering, intermittent operation, or warning messages on some vehicles. Adding the DAMA H7 CANbus decoder helps address compatibility-related issues between the vehicle lighting circuit and compatible LED bulbs. Because this component is an inline electrical interface rather than a light-emitting source, it does not independently change the color temperature, raw lumens, or beam pattern of your bulbs; instead, it helps address compatibility-related warning messages or flickering that may occur with some LED bulb installations.
OEM Quality & Reliability Section
DAMA automotive lighting hardware provides functional aftermarket servicing solutions for vehicle maintenance and retrofits. This error canceller features insulated wiring harnesses and compact inline modules that interface with compatible configurations. The replacement assembly provides an inline connection between the factory harness and compatible LED lighting components.
Installation Information
1. Disconnect Factory Harness: Ensure vehicle is off.
Locate the factory 2-pin H7 connector at the lighting assembly and disconnect it from your current bulb or LED driver input.
2. Connect Decoder Male Plug: Insert into vehicle wiring.
Align the 2 pins on the DAMA decoder's male connector plug and push it into the vehicle's factory female H7 harness socket until seated.
3. Connect Decoder Female Plug: Attach to LED bulb.
Plug the female 2-slot receiving socket of the DAMA decoder directly into the male input plug of your aftermarket H7 LED bulb or driver ballast.
4. Secure the Module: Mount securely.
Mount the inline decoder housing away from moving parts. Use zip ties or mounting tape to position the wiring cleanly within the engine bay.
Installation Warning: Some decoder modules may become warm during operation. Avoid mounting them directly against heat-sensitive plastic components, electrical lines, or fluid paths. Never wrap the modules tightly in insulating plastic tape or allow them to hang loosely inside the engine bay.
Technical Specs
| Size | H7 |
|
Connector Gender |
Male Female |
| Weather Resistant | Yes |
| Wire Gauge (AWG) | 18 AWG |
| Application | LED CANbus Error-Free Decoder |
HIDCONCEPT.COM ships worldwide using UPS, DHL, & USPS within 24-48 hours during the business days.
For International customers:Please be aware that your country may charge you customs duties, taxes, and brokerage fees on importing goods on certain products. We are not responsible for any customs or duty taxes that your country’s government agency may charge on your merchandise. We advise you to consult your local government import office with any questions.
Return
We will accept returns for a refund or exchange on products in NEW/ unopened condition with the UNOPENED original package within 30 days of delivery. All returns without an exchange are subject to a 15% restocking fee without exception. The customer would be responsible for return shipping unless the reason for the return was our mistake which we will send you the pre-paid shipping label for. Your original shipping cost will be deducted from the refundable amount if you use the promotional free shipping code. All refunds must be issued back to the original payment method. We will NOT be able to process your return if your RMA number is not included with your product. Please allow 2-3 business days for us to process the return upon receipt.
We reserve the right to deny/ refuse the return if your return does not meet the criteria stated above.
Exchange
Product may be exchanged if they are in NEW/ unopened condition with the UNOPENED original package within 30 days of delivery. Customer is responsible for shipping cost to and from our warehouse unless exchange is required by our mistake which we will cover all the shipping costs. You will not be able to re-use any promotional free shipping code if you have already used them on your original purchase.
Refund
Please allow 2-3 business days for us to process your refund once we receive your returned product. We will not issue the refund if your returned product does not meet the criteria we have stated on our return policy. Please note that there is a 15% restocking fee unless you are returning your product for an exchange.
Questions & Answers
Have a Question?
-
Do you troubleshoot for 2017 vw jetta se
We do not perform any troubleshooting or labor on vehicle.
-
Do you offer a LED decoder for 07 MB CLK350?
Since Mercedes Benz's low beam size is H7, this decoder would work. The decoder is not vehicle specific.
