SAME BUSINESS DAY SHIPPING
DAMA
DAMA EP29 4‑Pin LED Flasher Relay for Automotive / Motorcycle / ATV LED Turn Signal Hyperflash Fix Plug and Play | Pack of 1
SKU: FL-4P-EP29-X1
$11.99
In Stock
100% GENUINE PRODUCTS
WARRANTY COVERAGE
- Description
- Return Policy
The DAMA EP29 (EP29N) 4-Pin LED Flasher Relay is a plug-and-play replacement module made to eliminate the turn-signal hyperflashing issue caused by converting factory-installed halogen incandescent bulbs to LED bulbs. Hyperflashing is an integrated vehicle function that alerts drivers when a turn signal bulb has gone out. Because LED bulbs have far less power consumption, the vehicle’s indicator system registers the lower power level and mistakenly triggers a rapid flash sequence. Sourced from HID Concept.com, this plug-and-play relay resolves the issue immediately, providing a flashing frequency of approximately 90 flashes per minute. Sold as a single unit, this flasher relay requires no modifications for installation and is marketed for automotive, motorcycle, and ATV applications that use a compatible EP29/EP29N 4-pin flasher relay configuration.
Key Features & Benefits
- Turn Signal Correction: Specifically made to eliminate the rapid hyperflashing issue caused by converting vehicle signaling lamps from halogen incandescent bulbs to LEDs.
- Plug-and-Play Installation: Designed as a modification-free swap that connects directly into your vehicle's factory flasher relay socket.
- Blinking Frequency: Factory-preset to deliver a flashing frequency of approximately 90 flashes per minute.
- Operating Temperature Range: Rated for operation in environments ranging from −40°F to +176°F.
- Switch Current Capacity: Internal circuitry is engineered to handle an electrical switch current rating of up to 15A.
Vehicle Compatibility Section
This 4-pin flasher relay is marketed for automotive, motorcycle, and ATV applications that utilize a compatible EP29/EP29N 4-pin relay configuration. It features an EP29N cross-reference designation.
Important Manufacturer Warning: Relay socket layouts and terminal configurations vary significantly across vehicle makes, models, and model years. Please physically verify that your stock flasher unit uses the exact EP29/EP29N 4-pin terminal arrangement before ordering. Installing this module in an incompatible configuration can blow your fuses, destroy the electronic flasher, and void the product warranty.
Performance & Visibility Section
Upgrading indicator lights to LED lamps changes the vehicle signaling setup. The DAMA EP29 4-pin flasher relay addresses the rapid blinking rate, providing a flashing frequency of approximately 90 flashes per minute. While this flasher relay is an electronic control module that does not change the brightness or color output of your bulbs on its own, it functions to alter the flashing cadence to the standard speed setting.
Technical Specifications
Sourcing your replacement electrical hardware through HID Concept.com provides an electronic flasher accessory with a verified operating voltage of 12V DC. The module is engineered with a maximum switch current capacity of up to 15A and functions inside an environmental temperature range spanning from −40°F to +176°F.
Installation Information
The DAMA EP29 LED flasher relay features a direct plug-and-play design meant to replace your vehicle's factory module.
Location Note: Flasher relay locations vary significantly by vehicle. Please consult your vehicle’s factory service manual or owner’s manual if you require help finding the original relay block or fuse panel.
To install, locate your vehicle’s original factory flasher module, verify that the terminal layout matches the EP29 configuration, pull the stock unit straight out of the socket, and insert the new DAMA module firmly into position. Test both the turn signals and hazard light functions to ensure proper cycling before driving.
Technical Specs
| Pin Count | 4 pin |
|
Cross Reference |
EP29 EP29N |
| Operating Voltage | 12V |
| Operating Temperature | -40 °F ~ +176 °F |
| Flashing Frequency |
90 flash/min |
| Switch Current (Amp) |
15A |
| Application |
LED Turn Signal Hyperflashing Solution |
HIDCONCEPT.COM ships worldwide using UPS, FedEx, DHL, & USPS within 24-48 hours on business days.
For International customers:
Please be aware that your country may charge you customs duties, taxes, and brokerage fees on imported goods for certain products. We are not responsible for any customs or duty taxes that your country’s government agency may charge on your merchandise. We advise you to consult your local government import office with any questions.
Return
We will accept returns for a refund or exchange on products in NEW / unopened condition with the UNOPENED original package within 30 days of delivery. All returns without an exchange are subject to a 15% restocking fee without exception. The customer is responsible for return shipping unless the reason for the return was our mistake, in which case we will send you a prepaid shipping label. Your original shipping cost will be deducted from the refundable amount if you used a promotional free shipping code. All refunds must be issued back to the original payment method. We will NOT be able to process your return if your RMA number is not included with your product. Please allow 2-3 business days for us to process the return upon receipt.
We reserve the right to deny/refuse any return if it does not meet the criteria stated above.
Refund
Please allow 2-3 business days for us to process your refund once we receive your returned product. We will not issue a refund if your returned product does not meet the criteria stated in our return policy. Please note that there is a 15% restocking fee unless you are returning your product for an exchange.
