SAME BUSINESS DAY SHIPPING
DAMA
DAMA AMP to D2 HID Wire Connector - Headlight Connector for AMP Ballast to D2S D2R Xenon Bulbs Conversion 8" 18AWG | Pack of 2
SKU: WR-AMP-D2F-X2
Sale
$4.99
In Stock
100% GENUINE PRODUCTS
WARRANTY COVERAGE
- Description
- Return Policy
Adapt or upgrade your custom high-intensity discharge lighting circuits cleanly with the DAMA AMP to D2 HID Wire Connector Pack from HID Concept.com. This adapter harness is engineered for custom automotive retrofit installations where an aftermarket HID ballast with standard 2-pin AMP-style output connectors must interface with D2S, D2R, D2C, or D2 Xenon bulbs. Each adapter lead features 18AWG insulated electrical wire, providing a reliable path for routing power lines inside your headlight assemblies without manual splicing. Delivered as a convenient matching set of two, these inline adapters simplify your lighting conversion project by offering a plug-and-play architecture that eliminates complex wiring modifications.
Key Features & Benefits
- AMP-to-D2 Conversion Interface: Bridges standard aftermarket AMP ballast outputs directly to D2S, D2R, D2C, and D2 HID bulbs for straightforward retrofitting.
- Plug-and-Play Assembly: Offers an alternative to manual wire modifications—no cutting or splicing required to bridge your ballast and bulb connections.
- 18AWG Insulated Wire: Constructed from standard 18AWG insulated electrical wiring designed to provide consistent electrical continuity for compatible high-voltage HID lighting circuits.
- Weather-Resistant Build: Engineered using grade materials designed for durability and long-lasting performance in diverse driving conditions.
- Convenient Pack of 2: Includes a matching pair of conversion leads to seamlessly service both the driver and passenger sides of your dual headlight setup.
Vehicle Compatibility & Applications
This AMP-to-D2 HID connector harness is a specialized servicing accessory designed for a wide range of vehicles using HID bulbs alongside compatible OEM and aftermarket HID ballast systems.
Compatibility Note
Always verify your existing ballast and bulb specifications before starting installation. This adapter setup features terminal ends configured to accept an AMP input from a ballast and map it directly onto a standard D2 series (D2S/D2R/D2C/D2) bulb base interface. Before completing your order, check your hardware components to ensure compatibility with your physical bulb and ballast terminal connections.
Performance & Visibility Section
When executing a high-intensity discharge custom conversion or lighting repair, achieving secure connector engagement is critical for maintaining consistent electrical continuity across the high-voltage circuit. Poor or loose connections on an HID line can cause excessive electrical resistance, which may impact system reliability or contribute to intermittent headlight operation while driving. Integrating the DAMA AMP to D2 adapter harness establishes a compatible connector interface that provides electrical continuity between your ballast and the HID bulb base. Because this passive wire accessory acts strictly as an electrical conductor link rather than an active light-emitting source, it does not independently alter the beam pattern, color temperature, or lumen output of your headlights; instead, it allows your chosen HID bulbs to receive power as engineered.
OEM Quality & Reliability Section
DAMA automotive lighting accessories provide functional, durable aftermarket servicing parts for seamless project integration. Built with standard 18AWG insulated wire and heat-resistant terminals, these adapters are engineered to handle demanding automotive conditions. This matching 2-pack delivers an organized wiring solution as an alternative to uninsulated open terminal modifications or raw hand-splicing, providing a clean wiring solution during vehicle custom builds and routine maintenance.
Installation Information
This AMP to D2 HID conversion cable set features a straightforward, non-destructive wiring architecture. Turn off the vehicle's ignition and ensure the vehicle's electrical system is switched off before disconnecting any wiring. Access the headlight cavity according to your vehicle manufacturer's service procedure. Mount your D2S, D2R, or D2C bulb into the headlight projector assembly securely. Push the D2 socket head of the DAMA adapter fully onto the rear base of the HID bulb until securely seated. Connect the opposite AMP leads into the corresponding output plugs of your HID ballast. Ensure all connections are secure, and test your headlights before fully reinstalling the headlight assembly.
Technical Warning: Ensure the vehicle's electrical system is switched off and completely unpowered before performing installation work. Double-check and match your wiring polarities between the ballast leads and adapter pins before firing up the system to maintain correct circuit safety.
Technical Specs
| Lamp Size | D2 AMP |
|
Connector Gender |
Female |
| Weather Resistant | Yes |
| Wire Gauge (AWG) | 18 AWG |
| Wire Length | Appx. 8 Inches |
| Application | Retroffiting |
HIDCONCEPT.COM ships worldwide using UPS, DHL, & USPS within 24-48 hours during the business days.
For International customers:Please be aware that your country may charge you customs duties, taxes, and brokerage fees on importing goods on certain products. We are not responsible for any customs or duty taxes that your country’s government agency may charge on your merchandise. We advise you to consult your local government import office with any questions.
Return
We will accept returns for a refund or exchange on products in NEW/ unopened condition with the UNOPENED original package within 30 days of delivery. All returns without an exchange are subject to a 15% restocking fee without exception. The customer would be responsible for return shipping unless the reason for the return was our mistake which we will send you the pre-paid shipping label for. Your original shipping cost will be deducted from the refundable amount if you use the promotional free shipping code. All refunds must be issued back to the original payment method. We will NOT be able to process your return if your RMA number is not included with your product. Please allow 2-3 business days for us to process the return upon receipt.
We reserve the right to deny/ refuse the return if your return does not meet the criteria stated above.
Exchange
Product may be exchanged if they are in NEW/ unopened condition with the UNOPENED original package within 30 days of delivery. Customer is responsible for shipping cost to and from our warehouse unless exchange is required by our mistake which we will cover all the shipping costs. You will not be able to re-use any promotional free shipping code if you have already used them on your original purchase.
Refund
Please allow 2-3 business days for us to process your refund once we receive your returned product. We will not issue the refund if your returned product does not meet the criteria we have stated on our return policy. Please note that there is a 15% restocking fee unless you are returning your product for an exchange.
