DAMA 1157 Front Turn Signal Light Bulb Sockets Holders for Honda Accord | Pack of 2

DAMA 1157 Front Turn Signal Light Bulb Socket Holders for Honda Accord | Pack of 2

Restore steady electrical performance and reliable signal operation in your Honda Accord with this direct replacement Front Turn Signal Light Bulb Socket Holder. Engineered as an exact OEM-spec match for factory part number 33302-T2A-A01 (also cross-referenced as 33302T2AA01 and 33302 T2A A01), this high-grade socket assembly houses standard dual-filament 1157 / 1157A (2357A) bayonet bulbs. It provides a permanent fix for hyper-flashing, burnt contact pins, erratic flickering, and moisture-induced shorts caused by degraded stock connectors. Built with heat-resistant synthetic polymers and a weather-tight rubber gasket, it locks securely into place to keep your turn signals operating clearly and safely. Available as a premium replacement component at HIDConcept.com, this plug-and-play socket holder restores factory functionality without custom wiring or hassle.

Key Features & Benefits

• Fits Standard 1157 / 1157A / 2357A Bulbs: Engineered specifically to accommodate dual-filament bayonet-style bulbs, including 1157, 1157A, 2357, and 2357A amber or clear turn signal bulbs for precise indexing and steady electrical flow.
• Exact OEM Direct Replacement: Replaces factory part number 33302-T2A-A01 with matching locking tabs, terminal spacing, and connector indexing for a seamless fit.
• Fixes Hyper-Flashing & Circuit Failure: Restores continuous contact, eliminating hyper-flashing dashboard warnings, flickering indicators, and dark turn signal faults caused by melted stock sockets.
• Weather-Sealed Moisture Seal: Features an automotive-grade rubber O-ring seal that blocks water, road salt, dust, and humidity from reaching the internal electrical connections inside the lamp assembly.
• High-Heat Composite Polymer: Manufactured from high-dielectric, heat-resistant synthetic housing materials that withstand the continuous heat output of halogen bulbs without warping or cracking.
• 100% Plug-and-Play Installation: Snaps directly into your vehicle’s factory wiring harness and twist-locks smoothly into the OEM lamp assembly with no cutting or splicing required.

Vehicle Compatibility Section

This front turn signal bulb socket holder is engineered specifically for Honda Accord models utilizing OEM part number 33302-T2A-A01:

Honda MPN: 33302-T2A-A01 / 33302T2AA01

2013–2017 Honda Accord

Fitment Verification Note: Vehicle production dates, regional specs, and headlight variations (halogen vs. factory LED assemblies) can affect socket design. Please visually inspect your stock connector and verify OEM part number 33302-T2A-A01 on your original part before ordering.

Performance & Visibility Section 

A failing turn signal socket creates significant safety hazards on the road. When factory plastic retainers warp or internal brass contacts oxidize due to high bulb temperatures, electrical conductivity drops. This results in rapid hyper-flashing, dim output, or total bulb failure—leaving other drivers unaware of your turning intentions. Upgrading to a fresh OEM-spec socket assembly from HIDConcept.com restores optimal voltage flow to your 1157 / 1157A turn signal bulbs. Crisp, uninterrupted signaling ensures your vehicle remains fully compliant with highway safety standards while keeping you clearly visible to oncoming traffic during night driving and severe weather.

OEM Quality & Reliability Section

At HIDConcept.com, we specialize in supplying lighting components that meet or exceed original factory standards. Stock turn signal sockets on Honda Accord vehicles frequently suffer from thermal stress and seal deterioration over time. This replacement socket is constructed with corrosion-resistant terminal pins housed inside a high-temperature thermoplastic body. Paired with a heavy-duty silicone rubber weather seal, this socket isolates electrical contacts from engine bay heat, road debris, and moisture, ensuring long-term durability and trouble-free performance.

Installation Information

Replacing a damaged turn signal light socket is a straightforward DIY task requiring no electrical modifications:

• Safety Preparation: Turn off the engine, engage the parking brake, and ensure headlight housings have cooled down.
• Locate the Socket: Access the back of the front signal lamp housing from inside the engine compartment or through the wheel arch splash shield.
• Remove Broken Socket: Press the release tab on the wiring connector to detach the harness, then twist the socket counterclockwise to unlock it from the light housing.
• Insert 1157 / 1157A Bulb: Align the offset locking pins of a fresh 1157 or 1157A bulb into the socket slots, push down lightly, and twist clockwise until locked.
• Install & Test: Reattach the vehicle wiring harness, push the new socket into the housing receiver, and twist clockwise until it clicks into place. Test turn signal and hazard light operation to verify function.

Technical Specs