SAME BUSINESS DAY SHIPPING
DAMA
DAMA 1156 DRL & Signal Light Bulb Socket Holder Adapters for 2019-2021 Kia Forte | Pack of 2
SKU: SK-TK240-BLK-X2
$4.99
In Stock
100% GENUINE PRODUCTS
WARRANTY COVERAGE
- Description
- Return Policy
- Reviews
DAMA 1156 DRL & Signal Light Bulb Socket Holder Adapters for 2019-2021 Kia Forte | Pack of 2
The DAMA 1156 Daytime Running Light (DRL) / Turn Signal Lamp Socket Holder Adapters are OEM-spec replacement connectors engineered specifically for 2019–2021 Kia Forte models (OEM Part # 92164-M7050 / 92164M7050). Designed for single-filament 1156 / 7506 / P21W bulbs (BA15s base), these high-heat composite socket holder adapters restore solid electrical connectivity, fix erratic flickering, and resolve dashboard bulb-out errors in headlight assemblies. Offered as a convenient pack of 2 at HIDConcept.com, this plug-and-play solution delivers weather-sealed protection and long-term reliability.
Key Features & Benefits
- Fits Standard 1156 / 7506 / P21W Bulbs: Specifically engineered to hold 1156, 7506, P21W, and BA15s single-filament bayonet-base bulbs used for daytime running lights (DRL) and turn signals in Kia Forte models.
- Direct OEM Replacement: Exact physical match for factory part number 92164-M7050 (92164M7050) with matching locking tabs, terminal spacing, and connector indexing.
- Resolves Intermittent & Circuit Failures: Eliminates erratic flickering, burnt contacts, and dashboard warning light errors caused by melted or corroded stock sockets.
- High-Heat Thermoplastic Composite: Manufactured from high-dielectric composite materials that withstand continuous thermal stress without warping or breaking down.
- Weather-Tight O-Ring Seal: Features an automotive-grade rubber gasket that isolates electrical contacts from humidity, dust, and road spray inside the headlight housing.
- 100% Plug-and-Play Installation: Plugs directly into your factory wiring harness connector and twist-locks smoothly into place with zero wire cutting or splicing needed.
Vehicle Compatibility Section
This OEM-spec 1156 DRL and turn signal bulb socket holder adapter set is engineered for select Kia Forte models utilizing OEM part number 92164-M7050:
Kia MPN: 92164-M7050 / 92164M7050
2021-2019 Kia Forte
Fitment Verification Note: Vehicle production dates, trim packages, and factory headlight options (halogen vs. LED headlight trims) can alter socket requirements. Please visually inspect your original connector and verify OEM part number 92164-M7050 before ordering.
Performance & Visibility Section
A failing DRL or turn signal socket compromises on-road safety and vehicle visibility. Daytime running lights ensure your vehicle remains instantly noticeable to oncoming traffic in low-sunlight, overcast, or high-glare conditions. When thermal stress warps stock plastic retainers or oxidizes internal contact pins, light output drops or fails. Upgrading to fresh OEM-spec DAMA socket holder adapters from HIDConcept.com guarantees steady power flow to your 1156 / 7506 / P21W bulbs, restoring crisp illumination, compliant signaling, and peace of mind.
OEM Quality & Reliability Section
At HIDConcept.com, we specialize in supplying automotive lighting components that meet or exceed original factory standards. Stock DRL and signal sockets on modern vehicles are prone to thermal degradation and rubber seal hardening over time. These DAMA replacement adapters feature corrosion-resistant internal copper terminals housed inside high-grade dielectric composite bodies. Paired with a durable silicone weather seal, these assemblies isolate electrical contacts from engine bay heat and ambient moisture for long-lasting, trouble-free operation.
Installation Information
Replacing a damaged DRL or turn signal bulb socket on your Kia Forte is a straightforward DIY task requiring no custom tools or wiring mods:
- Safety Preparation: Turn off the engine, switch off headlights, engage the parking brake, and allow the engine compartment to cool down completely.
- Locate the Socket: Access the rear of the headlight housing from inside the engine compartment or through the wheel arch splash panel access flap.
- Remove Broken Socket: Press the connector release tab on the wiring plug to disconnect the harness, then rotate the socket counterclockwise to unlock it from the headlight body.
- Insert 1156 Bulb: Push a clean 1156 / 7506 / P21W single-filament bulb into the new DAMA socket, turning slightly clockwise until locked in place.
- Install & Test: Reconnect the factory harness plug, align the new socket into the headlight receiver, and twist clockwise until it clicks shut. Test DRL and turn signal operation before driving.
Technical Specs
| Size | 1156 |
|
Connector Gender |
Female |
| Weather Resistant | Yes |
| Application |
Lighting repair, retrofit |
HIDCONCEPT.COM ships worldwide using UPS, DHL, & USPS within 24-48 hours during the business days.
For International customers:Please be aware that your country may charge you customs duties, taxes, and brokerage fees on importing goods on certain products. We are not responsible for any customs or duty taxes that your country’s government agency may charge on your merchandise. We advise you to consult your local government import office with any questions.
Return
We will accept returns for a refund or exchange on products in NEW/ unopened condition with the UNOPENED original package within 30 days of delivery. All returns without an exchange are subject to a 15% restocking fee without exception. The customer would be responsible for return shipping unless the reason for the return was our mistake which we will send you the pre-paid shipping label for. Your original shipping cost will be deducted from the refundable amount if you use the promotional free shipping code. All refunds must be issued back to the original payment method. We will NOT be able to process your return if your RMA number is not included with your product. Please allow 2-3 business days for us to process the return upon receipt.
We reserve the right to deny/ refuse the return if your return does not meet the criteria stated above.
Exchange
Product may be exchanged if they are in NEW/ unopened condition with the UNOPENED original package within 30 days of delivery. Customer is responsible for shipping cost to and from our warehouse unless exchange is required by our mistake which we will cover all the shipping costs. You will not be able to re-use any promotional free shipping code if you have already used them on your original purchase.
Refund
Please allow 2-3 business days for us to process your refund once we receive your returned product. We will not issue the refund if your returned product does not meet the criteria we have stated on our return policy. Please note that there is a 15% restocking fee unless you are returning your product for an exchange.
Questions & Answers
Have a Question?
Be the first to ask a question about this.
