DAMA 7443 Female Wire Harness - Connector for Tail/Brake/Turn/Reverse Light 5" 18AWG | Pack of 2

DAMA 7443 Female Wire Harness - Connector for Tail/Brake/Turn/Reverse Light 5" 18AWG | Pack of 2

Help restore electrical connections to your vehicle's exterior lighting with the DAMA 7443 Female Wire Harness Connector Pack from HID Concept.com. Designed as a replacement 7443 female bulb socket for compatible applications, this 2-piece pigtail assembly addresses common dual-circuit signal lamp issues like intermittent connectivity. Each socket comes equipped with a rubber sealing ring and 5 inches of 18AWG wiring leads for routing. Whether you are performing a maintenance, repair, or adapting an aftermarket LED retrofit upgrade, this passive socket assembly provides an electrical connection between the vehicle harness and your dual-filament wedge bulbs.

Key Features & Benefits

• 7443 (T20) Specification: Designed for use in compatible 7443/T20 dual-filament lighting applications.
• 18AWG Wiring Leads: Equipped with 5 inches of 18-gauge wiring suitable for automotive signal lighting repairs and wiring replacement.
• Dual-Circuit Design: Features a 3-wire configuration for dual-circuit applications using low- and high-intensity bulb functions.
• Integrated Rubber Gasket: Includes a pre-fitted rubber sealing ring intended to interface with compatible lamp housings.
• Molded Plastic Socket Core: Features a molded plastic socket housing for automotive bulb applications, built for compatible automotive lighting assemblies.

Vehicle Compatibility & Applications

This replacement wire harness is designed for vehicles utilizing a standard 7443 dual-filament bulb socket layout for dual-function exterior signal lamps.

Fitment Note

Confirm your original socket configuration before purchasing. While the 7443 wedge-base is utilized by auto brands like Toyota, Lexus, Honda, Nissan, Subaru, Hyundai, and Kia, manufacturers use different socket configurations across various trims and model years. Vehicle make, model, and year alone are insufficient to determine compatibility. This adapter features a 3-wire connection intended for dual-filament functions and is not a standard substitute for single-circuit 2-wire 7440 sockets unless specifically pinning down a custom retrofit configuration.

Common applications include brake/tail lamps, combination signal lamps, daytime running lights (DRL), and other dual-function 7443 bulb applications. Verify the original socket type before purchase.

Performance & System Function

Corroded or damaged bulb sockets may cause intermittent operation or loss of bulb function. Replacing a failed socket with the DAMA 7443 harness may help restore electrical continuity between the vehicle wiring and the bulb. Because this is a passive electrical channel, it will not independently alter the brightness, lumens, or color temperature of your lighting; instead, it provides the connection required for your replacement halogen or LED upgrade bulbs to receive vehicle electrical power across both operating circuits.

Quality & Reliability

The replacement assembly features metal bulb-contact terminals housed within a molded socket body that accommodates the wedge bulb base. It is designed to provide an electrical connection between the vehicle wiring and a compatible 7443 bulb under normal driving conditions.

Installation Information

This repair harness features open-ended pigtail wires ready for manual wire stripping, terminal crimping, or soldering into your existing wiring loom. Because accurate polarity routing is recommended across the three socket wires to avoid electrical issues or blown fuses, verify your positive and ground paths with a multimeter or test light prior to final splicing. To keep your lighting housing sealed over time, protect your wire connections externally with electrical tape or adhesive-lined heat shrink tubing.

Vehicles That Commonly Use Straight 1156 Sockets
(Straight connectors are often the industry default when the light housing sits in a spacious area, or when the bulb inserts from an open, easily accessible panel.)

• Domestic Trucks & Large SUVs: Because these vehicles often have deeper cavities behind the taillight housings and flat rear quarter panels, they rarely run into clearance issues. Sockets regularly exit straight back into the bed or body cavity.
• Traditional Sedans and Select Japanese Imports: Standard trunk layouts frequently feature a carpeted liner with a wide, open void between the inner metal sheet panel and the plastic lens assembly, making straight sockets a very common fit.
• Tailgate-Mounted Reverse Lights: When the light assembly is physically mounted onto a lifting trunk lid or tailgate, the interior cavity of the lid is usually deep enough to let a straight harness drop naturally into the factory loom.

Technical Specs