DAMA 9006 HB4 Kanji Lux Vision Gen2 LED Projector Type 6000K | Pack of 2

DAMA 9006 HB4 Kanji Lux Vision Gen2 LED Projector Type 6000K | Pack of 2

The DAMA 9006 HB4 Kanji Lux Vision Gen2 LED Bulbs are specifically calibrated to maximize optical efficiency and down-road reach inside projector lamp assemblies. Powered by premium Flip LED 7545 SMD chip technology, this second-generation system delivers up to 6,200 lumens per set (3,100 lumens per bulb) at 32W, providing double the light density of standard factory halogen bulbs. Operating at a crisp 6000K pure white color temperature with a subtle blue hue accent on the cutoff line, these bulbs provide superior road illumination while modernizing your vehicle's front-end styling. Engineered with a non-polarity P22d base and heavy-duty heat sink, they offer a direct plug-and-play installation available through HID Concept.com, complete with a 2-year factory defect warranty.

Key Features & Benefits

• Projector-Optimized Optical Calibration: Diode placement is tailored specifically for projector lens optics to project an even beam spread, focused hotspots, and a sharp cutoff line without scattering glare.
• Flip LED 7545 SMD Diodes: Advanced high-density LED chips output up to 6,200 lumens per pair at 32W per bulb, delivering twice the luminous output of standard single-die LEDs even under elevated operating temperatures.
• 6000K White Beam: Emits a pure, modern 6000K daylight-like beam for superior road sign reflection and nighttime clarity, highlighted by a subtle blue accent along the cutoff line.
• Advanced Thermal Dissipation: Heavy-duty aluminum body with an integrated heat sink efficiently draws heat away from the LED chips to maintain stable output and extend bulb longevity.
• Direct Plug-and-Play Fitment: Engineered with an OEM-spec P22d base for 1:1 fitting into standard 9006 sockets, requiring zero wire cutting or complex retrofitting.
• 2-Year Factory Warranty: Manufactured to strict reliability standards and backed by a comprehensive 2-year defect warranty from HID Concept.com.

Vehicle Compatibility Section

The DAMA 9006 HB4 Kanji Lux Vision Gen2 LED Bulbs feature an exact OEM-spec P22d base. They serve as a direct replacement for single-filament 9006 bulbs used primarily in projector-type headlight assemblies and fog light housings.

Popular Vehicle Applications:

Fits 9006 projector headlight and fog light sockets on popular models from Toyota, Lexus, Honda, Acura, Nissan, Infiniti, Ford, Chevrolet, Dodge, GMC, Subaru, BMW, Audi, Volkswagen, Hyundai, Kia, and more.

Important Fitment & Polarity Note: Designed specifically for projector-style headlight assemblies and fog lights. Depending on the vehicle's electrical system (such as CANbus bulb monitoring or reduced-voltage Daytime Running Light circuits), installing LED bulbs may occasionally trigger a dash error light or hyper-flashing. In these cases, adding an inline 9006 CANbus decoder harness completely resolves flickering and clears error warnings.

Performance & Visibility Section

Upgrading from dull factory halogen bulbs to DAMA Kanji Lux Vision Gen2 LEDs significantly improves night driving safety and overall visibility. Standard 55W halogen 9006 bulbs output approximately 1,000 to 1,350 lumens of dim, yellow 3200K light. The DAMA Gen2 projector system generates up to 3,100 lumens per bulb while drawing only 32W, helping drivers spot road hazards, animals, and signage much farther ahead. The 6000K pure white beam improves contrast in dark conditions, while solid-state LED activation provides immediate 100% illumination with zero warm-up delay.

OEM Quality & Reliability Section

Sourcing your automotive LED upgrades through HID Concept.com guarantees genuine, heavy-duty lighting products built to perform. Unlike traditional halogen bulbs with fragile tungsten filaments and glass envelopes, DAMA Gen2 LED bulbs utilize solid-state Flip LED 7545 SMD chips that are immune to road vibrations, potholes, and thermal shocks. Combined with an integrated heat sink engineered for continuous heat dissipation, these bulbs maintain consistent light output and dependable operation over time.

Installation Information

Installing the DAMA 9006 HB4 Kanji Lux Vision Gen2 LED bulbs is a fast, 100% plug-and-play process requiring no wire slicing or housing modifications.

To install, turn off your vehicle ignition and ensure the headlight switch is set to the OFF position so stock halogen bulbs cool down completely. Access the back of the projector headlight housing or fog light assembly. Twist the stock 9006 halogen bulb counter-clockwise to release it from the socket, then disconnect the factory wiring connector. Insert the DAMA 9006 Gen2 LED bulb into the projector housing collar, turn clockwise until securely seated, and connect the factory plug to the LED harness. Turn on the lights to verify function; if the bulb does not illuminate, rotate the connector 180 degrees to reverse polarity. Once verified, secure any loose wiring and check beam alignment.

Note: For PROJECTOR-type lamp assembly. Depending on the vehicle may trigger an error message and/or a hyperflash. In case this happens, please install the CANBUS to eliminate the error. 

Application Note: LED bulbs from all brands are not compliant with DOT / FMVSS108 and are not street-legal in the USA. LED bulbs are only legal in the USA for Fog Light use. LED bulbs are legal for off-road use in ATV, snowmobile, and off-road racing use. International law and regulations vary by country.