|
| |
|
| |
Home < HID Adaptors < H4 to D2S/D2R Adaptors Gen3 |
|
| |
 |
| H4 to D2S/D2R Adaptors Gen.3 |
| |
|
|
|
|
| |
This is a brand new set of the newest version of H4 to D2S/D2R Adaptor Shields (bulbs not included); Gen3.
These Adaptors would allow you to use OEM PHILIPS D2S/D2R bulbs on your H4 halogen headlight housings without modification on the bulbs.
Compare to the previous generation of H4 adaptors, these have locking screws included, which allow you to secure the bulbs with the adaptors and also prevent bulbs from turning during the installation.
Using these shields will enable your H4 headlight housings reflect correct HID lights on the road, limit upward lighting glare, and creates cut-off line instead of scattered lights. If you want to use the high quality OEM xenon system with OEM bulbs, these adaptors are Must-have items!
|
Installation Tips:
1. Remove the existing H4 halogen light bulb from your headlight assembly.
2. Insert the H4 Adapter Shield into the H4 headlight housing.
3. Slide OEM D2S/D2R bulb into the H4 Adapter Shield and secure the bulb with a screw.
** Please note that the screw fitment is designed to be tight, to add extra holding strength.
4. Close the bulb holder. (the bulb holder needs to go over the HID bulb as well as the shield.)
5. Connect your D2S/D2R bulbs to your OEM Ballasts and you are good to go!
|
|
|
|
|
|
| Copyright © 2007, hidconcept.com, All rights reserved. |
|
|
|
|
